74HCT4852BQ-Q100

Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control

Automotive qualified

The 74HC4852-Q100; 74HCT4852-Q100 are dual single-pole quad-throw analog switches (SP4T) suitable for use in analog or digital 4:1 multiplexer/demultiplexer applications. Each switch features four independent inputs/outputs (nY0, nY1, nY2 and nY3) and a common input/output (nZ). A digital enable input (E) and two digital select inputs (S0 & S1) are common to both switches. When E is HIGH, the switches are turned off. The device features injection-current effect control. This allows signals at disabled analog input channels to exceed the supply voltage without affecting the signal of the enabled analog channel, eliminating the need for external diode/resistor networks typically used to keep the analog channel signals within the supply-voltage range. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of V_CC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Injection-current cross coupling < 1 mV/mA
Wide supply voltage range from 2.0 V to 6.0 V for 74HC4852-Q100
Latch-up performance exceeds 100 mA per JESD 78 Class II level A
Low ON-state resistance:
- 400 Ω (typical) at V_CC = 2.0 V
- 215 Ω (typical) at V_CC = 3.0 V
- 120 Ω (typical) at V_CC = 3.3 V
- 76 Ω (typical) at V_CC = 4.5 V
- 59 Ω (typical) at V_CC = 6.0 V
DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints
ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

Applications

Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
Automotive application

參數類型

型號	Configuration	V_CC (V)	R_ON (Ω)	Logic switching levels	Power dissipation considerations	T_amb (°C)	R_th(j-a) (K/W)	Ψ_th(j-top) (K/W)	R_th(j-c) (K/W)	Package name
74HCT4852BQ-Q100	SP4T-Z	4.5?-?5.5	240	TTL	very low	-40~125	80	4.7	47	DHVQFN16

PCB Symbol, Footprint and 3D Model

Model Name	描述

封裝

型號	可訂購的器件編號，（訂購碼(12NC)）	狀態	標示	封裝	外形圖	回流焊/波峰焊	包裝
74HCT4852BQ-Q100	74HCT4852BQ-Q100,1 (935298471115)	Active	HT4852	DHVQFN16 (SOT763-1)	SOT763-1		SOT763-1_115

環境信息

型號	可訂購的器件編號	化學成分	RoHS	RHF指示符
74HCT4852BQ-Q100	74HCT4852BQ-Q100,1	74HCT4852BQ-Q100

品質及可靠性免責聲明

Series

文檔 (10)

文件名稱	標題	類型	日期
74HC_HCT4852_Q100	Dual 4-channel analog multiplexer/demultiplexer with injection-current effect control	Data sheet	2024-04-16
AN11044	Pin FMEA 74HC/74HCT family	Application note	2019-01-09
AN90063	Questions about package outline drawings	Application note	2025-03-12
SOT763-1	3D model for products with SOT763-1 package	Design support	2019-10-03
Nexperia_package_poster	Nexperia package poster	Leaflet	2020-05-15
DHVQFN16_SOT763-1_mk	plastic, dual in-line compatible thermal enhanced very thin quad flat package; 16 terminals; 0.5 mm pitch; 3.5 mm x 2.5 mm x 0.85 mm body	Marcom graphics	2017-01-28
SOT763-1	plastic, leadless dual in-line compatible thermal enhanced very thin quad flat package; 16 terminals; 0.5 mm pitch; 3.5 mm x 2.5 mm x 1 mm body	Package information	2023-05-11
SOT763-1_115	DHVQFN16; Reel pack, SMD, 7" Q1/T1 product orientation	Packing information	2020-04-21
74HCT4852BQ-Q100_Nexperia_Product_Reliability	74HCT4852BQ-Q100 Nexperia Product Reliability	Quality document	2025-03-20
HCT_USER_GUIDE	HC/T User Guide	User manual	1997-10-31

模型

文件名稱	標題	類型	日期
SOT763-1	3D model for products with SOT763-1 package	Design support	2019-10-03

PCB Symbol, Footprint and 3D Model

Model Name	描述

訂購、定價與供貨

型號	Orderable part number	Ordering code (12NC)	狀態	包裝	Packing Quantity	在線購買
74HCT4852BQ-Q100	74HCT4852BQ-Q100,1	935298471115	Active	SOT763-1_115	3,000	訂單產品

樣品

作為 Nexperia 的客戶，您可以通過我們的銷售機構訂購樣品。

如果您沒有 Nexperia 的直接賬戶，我們的全球和地區分銷商網絡可為您提供 Nexperia 樣品支持。查看官方經銷商列表。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式數據手冊