74AVC4T245PW-Q100

4-bit dual supply translating transceiver with configurable voltage translation; 3-state

Automotive qualified

The 74AVC4T245-Q100 is an 4-bit, dual supply transceiver that enables bidirectional level translation. The device can be used as two 2-bit transceivers or as a 4-bit transceiver. It features four 2-bit input-output ports (nAn and nBn), a direction control input (nDIR), an output enable input (nOE) and dual supply pins (V_CC(A) and V_CC(B)). Both V_CC(A) and V_CC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins nAn, nOE and nDIR are referenced to V_CC(A) and pins nBn are referenced to V_CC(B). A HIGH on nDIR allows transmission from nAn to nBn and a LOW on nDIR allows transmission from nBn to nAn. The output enable input (nOE) can be used to disable the outputs so the buses are effectively isolated. The device is fully specified for partial power-down applications using I_OFF. The I_OFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either V_CC(A) or V_CC(B) are at GND level, both nAn and nBn are in the high-impedance OFF-state.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Wide supply voltage range: V_CC(A): 0.8 V to 3.6 V; V_CC(B): 0.8 V to 3.6 V
Complies with JEDEC standards:
- JESD8-12 (0.8 V to 1.3 V)
- JESD8-11 (0.9 V to 1.65 V)
- JESD8-7 (1.2 V to 1.95 V)
- JESD8-5 (1.8 V to 2.7 V)
- JESD8-B (2.7 V to 3.6 V)
Maximum data rates:
- 380 Mbit/s (≥ 1.8 V to 3.3 V translation)
- 200 Mbit/s (≥ 1.1 V to 3.3 V translation)
- 200 Mbit/s (≥ 1.1 V to 2.5 V translation)
- 200 Mbit/s (≥ 1.1 V to 1.8 V translation)
- 150 Mbit/s (≥ 1.1 V to 1.5 V translation)
- 100 Mbit/s (≥ 1.1 V to 1.2 V translation)
Suspend mode
Latch-up performance exceeds 100 mA per JESD 78 Class II
Inputs accept voltages up to 3.6 V
I_OFF circuitry provides partial Power-down mode operation
ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 3B exceeds 8000 V
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
Multiple package options
DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

參數類型

型號	V_CC (V)	Logic switching levels	Output drive capability (mA)	Nr of bits	Power dissipation considerations	T_amb (°C)	R_th(j-a) (K/W)	Ψ_th(j-top) (K/W)	R_th(j-c) (K/W)	Package name
74AVC4T245PW-Q100	n.a.	CMOS/LVTTL	± 12	4	very low	-40~125	124	4.4	53.6	TSSOP16

PCB Symbol, Footprint and 3D Model

Model Name	描述

封裝

型號	可訂購的器件編號，（訂購碼(12NC)）	狀態	標示	封裝	外形圖	回流焊/波峰焊	包裝
74AVC4T245PW-Q100	74AVC4T245PW-Q100J (935301112118)	Active	VC4T245	TSSOP16 (SOT403-1)	SOT403-1	SSOP-TSSOP-VSO-WAVE	SOT403-1_118

環境信息

型號	可訂購的器件編號	化學成分	RoHS	RHF指示符
74AVC4T245PW-Q100	74AVC4T245PW-Q100J	74AVC4T245PW-Q100

品質及可靠性免責聲明

Series

文檔 (11)

文件名稱	標題	類型	日期
74AVC4T245_Q100	4-bit dual supply translating transceiver with configurable voltage translation; 3-state	Data sheet	2024-04-11
AN90007	Pin FMEA for AVC family	Application note	2018-11-30
Nexperia_document_guide_Logic_translators	Nexperia Logic Translators	Brochure	2021-04-12
SOT403-1	3D model for products with SOT403-1 package	Design support	2020-01-22
avc4t245	74AVC4T245 IBIS model	IBIS model	2020-11-23
Nexperia_package_poster	Nexperia package poster	Leaflet	2020-05-15
TSSOP16_SOT403-1_mk	plastic, thin shrink small outline package; 16 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm body	Marcom graphics	2017-01-28
SOT403-1	plastic, thin shrink small outline package; 16 leads; 5 mm x 4.4 mm x 1.2 mm body	Package information	2023-11-08
SOT403-1_118	TSSOP16; Reel pack for SMD, 13"; Q1/T1 product orientation	Packing information	2020-04-21
74AVC4T245PW-Q100_Nexperia_Product_Reliability	74AVC4T245PW-Q100 Nexperia Product Reliability	Quality document	2024-06-16
SSOP-TSSOP-VSO-WAVE	Footprint for wave soldering	Wave soldering	2009-10-08

支持

如果您需要設計/技術支持，請告知我們并填寫應答表我們會盡快回復您。

模型

文件名稱	標題	類型	日期
avc4t245	74AVC4T245 IBIS model	IBIS model	2020-11-23
SOT403-1	3D model for products with SOT403-1 package	Design support	2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name	描述

訂購、定價與供貨

型號	Orderable part number	Ordering code (12NC)	狀態	包裝	Packing Quantity	在線購買
74AVC4T245PW-Q100	74AVC4T245PW-Q100J	935301112118	Active	SOT403-1_118	2,500	訂單產品

樣品

作為 Nexperia 的客戶，您可以通過我們的銷售機構訂購樣品。

如果您沒有 Nexperia 的直接賬戶，我們的全球和地區分銷商網絡可為您提供 Nexperia 樣品支持。查看官方經銷商列表。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式數據手冊